Control unit with the patented Deep Penetration System and two pressure micro-regulators
The ELC01 control unit is equipped with the patented Deep Penetration System which guarantees a high level of penetration in every nook and cranny with a meaningful reduction of the Faraday cage.
The key feature of this system is its great effectiveness in transferring and spreading the powder all over the part to be coated.
The output voltage is automatically regulated according to the distance between the gun and the part thus guaranteeing a flawless penetration without any “orange peel” effect.
The regulation of pneumatic parameters (powder and pulverization air) is made through two pressure micro-regulators.
The adjustment of electric parameters is made through two separate potentiometers regulating uA Current/Kv Voltage.
User-friendly graphics help choosing among the 4 recipes according to the kind of part to be coated, anyhow the operator is free to make quick and slight changes in order to always get the best setting for any kind of desired finish.
Thanks to the current regulating handle (uA), the operator can set the voltage reduction speed according to the distance of the part in order to have a more powerful application at bigger distances and a softer one at shorter distances.
|Types of powder||STANDARD – METALLIC – FLUORESCENT|
|Electric power||115-230 Vac – 50-60 Hz|
|Input power||30 Watt|
|Max input air pressure||6 Bar|
|Max air consumption||300 lt/min|
|Electrics outputs||12Vcc at 30mA – 1V at 6mA – 2V at 6mA – 24V at 20mA|
|Output air flow regulations||0 – 4 bar|
|Dimensions (LxPxH)||– mm|